Processor cores

Conroe

The first Intel Core 2 Duo branded processor cores, code-named Conroe (Intel product code 80557), were launched on July 27, 2006, at Fragapalooza, a yearly gaming event in Edmonton, Alberta, Canada. These processors were fabricated on 300 mm wafers using a 65 nm manufacturing process, and intended for desktop computers, as a replacement for the Pentium 4 and Pentium D branded CPUs. Intel has claimed that Conroe provides 40% more performance at 40% less power compared to the Pentium D. All Conroe processors are manufactured with 4 MB L2 cache; however, due to manufacturing defects or possibly for marketing purposes, the E6300 and E6400 versions based on this core have half their cache disabled, leaving them with only 2 MB of usable L2 cache. These Conroe-based E6300 and E6400 CPUs have the B2 stepping.

The lower end E6300 (1.86 GHz) and E6400 (2.13 GHz), both with a 1066 MT/s FSB, were released on July 27, 2006. Traditionally, CPUs of the same family with less cache simply have the unavailable cache disabled, since this allows parts that fail quality control to be sold at a lower rating. When yields improve, they may be replaced with versions that only have the cache amount needed on the die, to bring down manufacturing cost. At launch time, Intel's prices for the Core 2 Duo E6300 and E6400 processors were US$183 and US$224 each in quantities of 1000. Conroe CPUs have improved capabilities over previous models with similar processor speeds. According to reviews, the larger 4 MB L2 cache vs. the smaller 2 MB L2 cache at the same frequency and FSB can provide a 0–9% performance gain with certain applications and 0–16% performance gain with certain games.^[9][10] The higher end Conroe processors are the E6600 (2.4 GHz) and E6700 (2.67 GHz) Core 2 Duo models. The family has a 1066 MT/s front side bus, 4 MB shared L2 cache, and 65 watts TDP. These processors have been tested against AMD's then-current top performing processors (Athlon 64 FX Series), which were, until this latest Intel release, the fastest CPUs available. Conroe chips also experience much lower heat output compared to their predecessors — a benefit of the new 65 nm technology and the much more efficient microarchitecture. At launch time, Intel's prices for the Core 2 Duo E6600 and E6700 processors were US$316 and US$530, respectively, each in quantities of 1000.

E6320 and E6420 Conroe CPUs at 1.86 and 2.13 GHz respectively were launched on April 22, 2007 featuring a full 4 MB of cache and are considered Conroes.

Intel released four additional Core 2 Duo Processors on July 22, 2007. The release coincided with that of the Intel Bearlake (x3x) chipsets. The new processors are named Core 2 Duo E6540, E6550, E6750, and E6850. Processors with a number ending in "50" have a 1333 MT/s FSB. The processors all have 4 MB of L2 cache. Their clock frequency is similar to that of the already released processors with the same first two digits (E6600, E6700, X6800).^[11] An additional model, the E6540, was launched with specifications similar to the E6550 but lacking Intel Trusted Execution Technology and vPro support. These processors are slated to compete with AMD's Stars processor line and are therefore priced below corresponding processors with a 1066 MT/s FSB.^[12]

Intel has stated that the E6300 and the E6400 are Conroe CPUs with the cache disabled. Allendale core CPUs are the E4XX0 series of CPUs.